Auto Parts Solar Simulation Test Chamber
Application
Auto parts sunlight simulation test chamber is applicable for testing the automotive interior parts such as IP, DP, Cockpit, CNSL, ashtrays, air outlets and other parts.
Technical parameters
| Temperature range | -50℃~+120℃ |
| Temperature deviation | ≦±2℃ |
| Temperature uniformity | ≦2.0℃ |
| Temperature fluctuation | ≦±0.5℃ |
| Heating rate | ≦1℃ min or customized |
| Cooling rate | ≦0.7℃ min or customized |
| Humidity range | 20-95%rh |
| Humidity deviation | ≦±5%rh |
| Humidity fluctuation | ≦±2.5%rh |
| Iiiumination intensity | Up to 1200W/m2; When the air temperature is 65℃, the surface temperature of sample can be controlled to 120℃. |
| | Low-temperature relative humidity monitor is optional. Under low temperature, the relative humidity is ≦30% RH |
| | Self-programming control |
| | Temperature and humidity control range of active heat load |
Reference Standards
PR308.2 2006 70℃ 95%RH ,105℃ storage in high temperature
GB2423.1-2008(IEC68-2-1:2007) Test A:Low temperature test
GB2423.2-2008 (IEC68-2-2:2007) Test B:High temperature test
GB2423.3-2006(IEC68-2-78:2001) Test Cab:Constant damp heat test (if there are requirements for humidity)
GB2423.4-2008 (IEC68-2-30:2005) Test Db:Alternating damp heat test (if there are requirements for humidity)
GJB150.3A-1986 High temperature
GJB150.4A-1986 Low temperature
GJB150.9A-1986 Damp heat test (Figure1, figure2)
GJB899-90 Reliability identification and acceptance test
GJB1032-90 Selecting method of environments stress of electronic products
GB10589-2008 Technical specifications for low temperature test chamber
GB11158-2008 Technical specification for high temperature test chamber
GB10586-2006 Technical specification for damp heat test chamber
MS210-05
IEC60068-2-2,-3,-28,-30,-56
JJF1101-2003
Thermal stability test of automotive parts
PV2005 Scheme A 2000
PV1200 2004
Gallery
Cases
For futher information pls contact with us:
